The Nigerian Content Development and Monitoring Board (NCDMB) was founded in 2010 under the Nigerian Oil and Gas Industry Content Development (NOGICD) Act, according to the information provided.
The NOGICD Act was passed into law on April 22, 2010, and the NCDMB has been tasked with developing procedures to guide, monitor, coordinate, and implement its requirements.
We are recruiting to fill the position below:
Job Title: Mechanical Engineer
Location: Nigeria
Project: Flex Joint Replacement Project
Scope of Work
- Provision of open water installation engineering support to ensure that the replacement of the flex joint is executed in line with company and Industry standard with key focus on safety quality, cost and schedule.
Scope will cover the following:
- Ensure utilization of Shell standard work processes (ORP / ORS, Performance agreements, HSE management process, MOC process, etc)
- Interface coordination with the EPC contractor
- Ensure the engineering schedule and quality expectations are met through coordination of the activities of the external contract resources, Discipline Engineers, Construction Engineers and Shell specialists.
- Ensure Bonga Operations requirements are captured in the planning. Establish agreed arrangements for commissioning and handover with Operations Readiness and Assurance team.
- Review and ensure EPC contractor deliverable are in compliance with COMPANY and industry standard.
- Lead the offshore execution scope as the COMPANY
Others:
- Review of all technical interfaces required for safe operations of Contractor equipment on Bonga FPSO – (Hook loads, Equipment clearances, Destruct scope etc)
- Closely monitor and ensure close out of all project construction risk items,
- Maintain oversight of Offshore repair schedule and activity sequence
- Accountable for the Offshore Construction Management Plan and overall offshore execution.
- Manage all offshore permitting requirements to ensure optimized hands-on tool time.
- Accountable for ensuring compliance with all applicable Construction HSSE requirements
- Review and endorse all FAT ITPs, plans and procedures
- Work closely with Contractor to execute the offshore readiness on paper review.
- Participate in all constructability reviews and HAZIDS
- Take ownership of Construction phase SIMOPs and establish agreed interface procedures with adjacent work sites and Bonga Operations
- Ensure compliance with the project change management procedure.
- Review all logistics plans for the movement of personnel and equipment to confirm they are being conducted in the most efficient, secure and safe manner.
- Planning, managing and integratin scopes and resources allocations in brownfield offshore environment
- Managing PTW during offshore construction execution on Bonga FPSO
- Preparation and review of mechanical and piping construction work packages.
- Provision of equipment assurance for compliance to standards/requirements.
- Initiation and implementation of changes in mechanical and piping scope using the Shell’s change management process.
- Review and implementation of Construction Site Safety Systems at onshore and offshore construction worksites.
- Development and implementation of resource plans and forecasts.
Qualifications and Experience
- Mandatory – Previous experience in flex joint replacement in deep-water or previous experience in engineering for flex joint replacement in deep water
- BOSIET / Approved Offshore Medical / OSP.
- A University Degree in an Engineering discipline with minimum of 8 years of experience in Oil and Gas Industry in Project Engineering, Project Management, Deepwater Construction and Installation Engineering
- Management, Deepwater Construction and Installation Engineering
- Mastery open water engineering experience required in the areas of pipeline, floating production systems, fixed platform installations, SURF and Subsea hardware Installation
- HSE or Engineering or Technical training in relevant field.
- Committed and effective in applying and implementing safety rules and practices (cultural changes) with Goal Zero objective in mind
- Ability to work and guide multidiscipline teams of professionals
- Fluent in the English language.
- Proven ability to work in a multi-disciplinary team as well and to work independently with minimum supervision
- Must have knowledge / skill level in HSE rules and applications within the Oil and gas Industry.
- Age: Minimum: 40 years, Maximum: 50 years.
Job Title: Construction Engineer
Location: Nigeria
Project: Flex Joint Replacement Project
Scope of Work
- Provision of open water installation engineering support to ensure that the replacement of the flex joint is executed in line with company and Industry standard with key focus on safety quality, cost and schedule.
Scope will cover the following:
- Ensure utilization of Shell standard work processes (ORP / ORS, Performance agreements, HSE management process, MOC process, etc)
- Interface coordination with the EPC contractor
- Ensure the engineering schedule and quality expectations are met through coordination of the activities of the external contract resources, Discipline Engineers, Construction Engineers and Shell specialists.
- Ensure Bonga Operations requirements are captured in the planning. Establish agreed arrangements for commissioning and handover with Operations Readiness and Assurance team.
- Lead the offshore execution scope as the COMPANY
- Review and ensure EPC contractor deliverable are in compliance with COMPANY and industry standard.
- Review of all technical interfaces required for safe operations of Contractor equipment on Bonga FPSO – (Hook loads, Equipment clearances, Destruct scope etc)
- Closely monitor and ensure close out of all project construction risk items,
- Maintain oversight of Offshore repair schedule and activity sequence
- Accountable for the Offshore Construction Management Plan and overall offshore execution.
- Manage all offshore permitting requirements to ensure optimized hands-on tool time.
- Accountable for ensuring compliance with all applicable Construction HSSE requirements
- Review and endorse all FAT ITPs, plans and procedures
- Work closely with Contractor to execute the offshore readiness on paper review.
- Participate in all constructability reviews and HAZIDS
- Take ownership of Construction phase SIMOPs and establish agreed interface procedures with adjacent work sites and Bonga Operations
- Ensure compliance with the project change management procedure.
- Review all logistics plans for the movement of personnel and equipment to confirm they are being conducted in the most efficient, secure and safe manner.
Expected Deliverables:
- 100% Success of all HVAC & AHU PMs / CMs with Zero LTI, cost savings and optimized schedule to support aspiration of high availability and reliability of HVAC systems in the BONGAFPSO.
- Onshore Work Preparation and maintenance plan updates.
- Offshore Technical Support.
- BOM updates.
- Produce Monthly Report.
Qualification and Experience
- BOSIET / Approved Offshore Medical.
- A University Degree in an Engineering discipline with minimum of 8 years operational commercial technical experience of which at least 5 years must be at supervisor level.
- Extensive trees / control experience, understands topsides interfaces and can communicate technical issues at all levels.
- Ability to impart confidence to asset operators and contractor’s offshore management.
- Proficient in all aspects of underwater installation engineering, with strong experience in underwater lifting and hoisting operations.
- Fully conversant with Shell, IOGP, IMCA and industry best practices
- Fluent in the English language.
- Proven ability to work in a multi-disciplinary team as well and to work independently with minimum supervision.
- Must have knowledge /skill level in HSSE golden rules and applications within the Oil and gas Industry.
- Valid OSP.
- Age: Minimum: 40 years, Maximum: 55 years.
How to Apply
Interested and qualified candidates should send their Applications along with CV to: job.advert2022@gmail.com , etechnical351@gmail.com and stakeholder.recruitment@ncdmb.gov.ng using the Job Title as the subject of the mail
Breaking News
This article was published on TDPel Media. Thanks for reading!Share on Facebook «||» Share on Twitter «||» Share on Reddit «||» Share on LinkedIn